The Up-Cycle
Pedal arm 3-piece Pedal Crank (left side)
Pedal arm 3-piece Pedal Crank (left side)
This is our selection of Refurbished Left-side pedal arms!
There are 3 things to note mainly about the arm to make sure you get the right one.
1st) Is it Curved or Straight?
Most times with bicycle arms, they will be shaped 1 of 2 ways to fit the style frame they are for. You can use a Curved arm in place of a Straight arm, but not a Straight arm in place of a Curved arm, it is likely to impact on the frame.
2nd) Is it a Diamond or Squared Pattern?
They will both accommodate the same size axel, however it is about orientation. Make sure to look at the arm perfectly vertical or horizontal to see which it has.
Diamond Shaped are what we have pictured here (the black one is Squared). One of the corners of the square in the middle will point towards the pedal, this is Diamond shaped. Squared will have a flat portion of the square facing the pedal. If yours has a different mount to it, its for a different style of crank. This is for the average Supercycle, CCM, Schwinn etc. Department store bikes and most bikes 20 to 30 years old.
You will need to remove the Crank Axel Bolt in order to verify what style it is. This will be an 8mm Allen Key or a 14mm Socket
3rd) How long is it?
PLEASE NOTE: Your old 3 piece crank pedal will fit into this arm, they are universal for this style of crank.
If you require assistance, please contact theup-cycle@hotmail.com and we will do our best to assist you!